상품명 | [#TRX4ZSP48-OC] TRX-4 Defender D110 Interior |
---|---|
상품코드 | #TRX4ZSP48-OC |
제조사 | GPM |
판매가 | 52,100원 |
현재고 | 3개 |
적립금 | 1,040원 (2%) 520원 (1%) 520원 (1%) 520원 (1%) |
원산지 | 중국 |
배송방법 | 택배 |
수량 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드수량을 선택해주세요.
위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.
상품명 | 상품수 | 가격 |
---|---|---|
[#TRX4ZSP48-OC] TRX-4 Defender D110 Interior | 52100 ( 0) |
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
Accessories:
Interior Part-1pc
Sticker-1pc
Steering Wheel-1pc
Hand Brake -1pc
Glove Compartment-1pc
Gear Stick-1pc
Foot Brake Pedal-1pc
Manual number:
Decoration part
Product major function & usage:
Transparent in color in order for users to paint different colors according to preference.
Other special notes and comments:
Suitable for Traaxxas TRX4 Defender
The interior is directly mounted on the car shell.
Installation Step 1
1. Before applying the color, cut the transparent shell according to the size of the shell and trim off the extra material on the edges.
2. Follow the cutting lines to cut out the center and the seat part.
3. Be careful not to cut too much. More trimming can be done during installation.
4. Apply color once trimming is completed. Note: Remove any oil before coloring.
5. To provide more room, rear body post is recommended to be cut after coloring.
Installation Step 2
1. Once coloring is completed, place stickers according to the corresponding position.
2. Carefully install the steering wheel, foot brake pedal, gear stick and other accessories. The steering wheel is movable, pay attention to the installation direction.
Installation Step 3
1. Install the central part. First, remove the front skid plates.
2. Remove the original screws. Pay attention to whether it is level from the front gear when installing. Tighten the screws after adjustment.
Installation Step 4
1. Installing the seats. First, remove the rear skid plates and spare tire stabilizer.
2. Due to the removal of the spare tire stabilizing parts, if the original spare tire stabilizer is needed, please fix with a locknut.
Installation Step 5
1. Fix the center part and seats with screws.
2. Install the front wheel and skid plates.
3. After installation, raise the front and rear body posts on the original shell by one positioning hole. Note: Each installation may vary, raise or lower the positioning hole if necessary.
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다